Siemens HiPath 3000 Service Manual page 969

Table 12-7 HiPath 3000 Class B Error Messages
No.
66 Out of buffers U
Error Class B-11 - General Errors
58 Too many layer 1 errors
Error Class B-12 - Processor Exception
0 Reset initial stack pointer
1 Reset initial program counter
2 Interrupt access error
3 Interrupt address error
4 Interrupt, command not permitted
5 Interrupt, division by zero
6 Invalid opcode exception
7 TRAP C or TRAP V instruction
8 Security violation
9 Trace
10 Line 1010 emulator
11 Line 1111 emulator
12 HW breakpoint (CBFC: possible EXTEB
error)
13 Co-processor, security violation
14 Formatting error, unwanted interruption
15 Formatting error, unwanted interruption
Error Class B-15 - APS Transfer
0 APS transfer successful
1 APS transfer successful, CDB OK
2 APS transfer successful, default CDB
loaded
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Meaning
/CMI: Error corrected
P0/E
Action
Recovery
–
– Check line, possibly re-
Hard restart Notify appropriate service
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
Hard restart
APS transfer
–
–
service.fm
Service
Guided Maintenance
Action
Technician
–
place board
support
–
–
–
12-51