Figure 4-52 Hipath 3750 - Mounting The Stabilizer Feet - Siemens HiPath 3000 Service Manual

Procedure: Fitting stabilizer feet
Caution
7
Always mount the stabilizer feet on stacked, surface-mounted system cabinets to
ensure stability (Figure 4-52).
Step
1. Place the stabilizer feet beneath the right and left outer edges of the cabinets. In-
sert the cabinet feet into the two holes in the stabilizer feet (1).
2. Attach the stabilizer feet to the metal housing of the cabinet (2) by inserting two
screws per foot into the pre-drilled holes in the housing.
3. Continue installing the system.
Mounting the stabilizer feet
Figure 4-52 HiPath 3750 - Mounting the Stabilizer Feet (Three-Cabinet System Shown)
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
(2)
(1)
Installing HiPath 3750, HiPath 3700
Activity
(2)
(1)
inst_h3.fm
Installing HiPath 3000
(2)
4-97