Siemens HiPath 3000 Service Manual page 891

Hide thumbs Also See for HiPath 3000:

Table of Contents

optiClient Attendant V7.0 as central attendant console

optiClient Attendant can be used as a central attendant console in an IP network (max. 6 opti-

Client Attendant per network). To enable network-wide BLF functionality, all attendant consoles

must be connected to one of the network's HiPath 3000 nodes and registered. This functionality

is independent of the optiClient Attendant connection type (V.24, USB or TCP/IP). For the net-

work-wide Busy Lamp Field function all decentralized systems send their station states (e.g.

free or busy) to the central system, to which the optiClient Attendants are connected. Signaling

takes place in the CorNet-IP protocol (CorNet-NQ protocol tunneled in H.323 via annex M1).

In an IP network, a maximum of 100 stations per node can be defined that send their status

information to the central optiClient Attendant for display on the busy lamp field. The stations

of the central system in the network (to which the optiClient Attendants are connected) can all

be displayed on the busy lamp field of the central attendant console.

Note: The control of the network-wide busy signal via the optiClient Attendant is independent

of the network-wide busy signal to the workpoints clients via HiPath 5000 Presence Manager.

Model-specific data

Feature available in

Maximum number of connectable

optiClient Attendants

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Workpoint Clients

Attendant console versions

Chapters

Table of Contents