Hitachi WJ200 Series Quick Reference Manual page 42

Chapter 8 PROFINET Specification
Bit Value
0 Coast Stop Activated
(OFF 2)
5 1 Quick Stop Not Activated
0 Quick Stop Activated
(OFF 3)
6 1 Switching On Inhibited
0 Switching On Not Inhibit
7 1 Warning Present
0 No Warning
8 1 Speed
Tolerance Range
0 Speed
Tolerance Range
9 1 Control Requested
0 No Control Requested
10 1 f
Exceeded
0 f Or n Not Reached
11
-
15
Significance
Error Within
Error Out
Or n Reached
When STW1 bit1 is OFF, this bit is OFF.
When STW2 bit1 is ON, this bit is ON.
When STW2 bit1 is OFF, this bit is OFF.
When the state is "Switching On Inhibited", this bit
is ON.
When the state isn't "Switching On Inhibited",
this bit is OFF.
When warning occurs in inverter or WJ-PN, this bit is
ON.
No warning occurs in inverter or WJ-PN.
When the output
frequency, this bit is ON.
Of When the output frequency doesn't reach the set
frequency, this bit is OFF.
WJ-PN can accept data that is communicated by
PROFINET.
WJ-PN can't accept data that is communicated by
PROFINET.
Or When the output frequency reaches or exceeds the
set frequency, this bit is ON.
This bit is same as FA2 of WJ200 / WL200. You need
to set C042 and C043.
When the output frequency doesn't reach and
exceed the set frequency, this bit is OFF.
This bit is same as FA2 of WJ200 / WL200. You need
to set C042 and C043.
Reserved
36
Description
frequency reaches the set