Hitachi wj200 series Quick Reference Manual page 52

Monitoring functions
NOTE: Parameters marked with " " in A column are accessible even in inverter running.
Parameters marked with " " in B column are accessible even in inverter running when in
the high level access mode, which means that b031 is set to "10".
* Please change from"
code display restriction), in case some parameters cannot be displayed.
IMPORTANT
Please be sure to set the motor nameplate data into the appropriate parameters
to ensure proper operation and protection of the motor:
b012 is the motor overload protection value
A082 is the motor voltage selection
H003 is the motor kW capacity
H004 is the number of motor poles
Please refer to the appropriate pages in this guide and the Instruction Manual for further details.
Func.
Name
Code
D001
Output frequency monitor
D002
Output current monitor
D003
Rotation direction monitor
D004
Process variable (PV),
PID feedback monitor
D005
Intelligent input
terminal status
04
(Basic display)" to "
"d" Function
Real time display of output frequency
to motor from
0.00 to 400.0(580.0)
If b163 is set high, output frequency
(F001) can be changed by up/down
key with d001 monitoring.
Filtered display of output current to
motor, range is
0.0 to 655.3 ampere (~99.9 ampere
for 1.5kW and less)
Three different indications:
"F"...Forward
"o"...Stop
"r"...Reverse
Displays the scaled PID process
variable (feedback) value (A075 is
scale factor),
0.00 to 10000
Displays the state of the intelligent
input terminals:
00
(Full display)" in parameter
Description
*1
Hz
ON
OFF
7 6 5 4 3 2 1
Terminal numbers
52
B037
(Function
A B Units
Hz
A
− −
− − −
% times
− −
constant
− − −