Hitachi wj200 series Quick Reference Manual page 64

Func.
Name
Code
a155
Deceleration hold time
a156
PID sleep function
action threshold
a157
PID sleep function
action delay time
A161
[VR] input active range
start frequency
A162
[VR] input active range
end frequency
A163
[VR] input active range
start %
A164
[VR] input active range
end %
A165
[VR] input start
frequency select
*1
: Up to 580Hz for high frequency mode (b171 set to 02)
*2
: Available from version 3.0
*3
: Power cycle is required to reflect a change.
*4
: Available from version 3.1
"A" Function
Description
Sets the duration of
deceleration hold, range is 0.0
to 60.0 seconds
Sets the threshold for the
action, set range 0.00 to
*1
400.0(580.0)
Sets the delay time for the
action, set range 0.0 to 25.5
sec
The output frequency
corresponding to the analog
input range starting point,
range is 0.00 to
*1
400.0(580.0)
The output frequency
corresponding to the current
input range ending point,
range is 0.00 to
*1
400.0(580.0)
The starting point (offset) for
the current input range,
range is 0. to 100.%
The ending point (offset) for
the current input range,
range is 0. to VR end ratio(%)
Two options; select codes:
00...Use offset (A161 value)
01...Use 0Hz
A
Hz
Hz
Hz
64
Defaults
B
Initial data
0.0
0.00
0.0
0.00
0.00
0.
100.
01
Units
s
Hz
s
Hz
Hz
%
%
−