Siemens SINUMERIK 828D Function Manual page 966

P3: Basic PLC Program for SINUMERIK 840D sl
13.13 Block descriptions
Parameterization
Signal Type Value range
WVar6 INT
WVar7 INT 1, 2, 3
WVar8 INT 0, 1, 2, 3
PI service: TMCRMT
Function: Create multitool
Creating a new multitool with specification of an identifier, optionally a multitool number, number of locations and
type of distance coding. Tool T numbers, magazine numbers and multitool numbers are unique in the permissible
number range 1 ... 32000. When you create the multitool, all of the associated locations are also generated.
Note
Before and after this PI service, the MMCSEM PI service must be called up with the
associated parameter WVar1 for this PI service. See PI service MMCSEM for more
information.
Parameterization
Signal Type Value range
PIService ANY PI.TMCRMT
Unit INT 1 ... 10
Addr1 STRING max. 32
characters
WVar1 INT 0
WVar2 INT -1 ... 32000
966
Meaning
PlaceNrRef Location number of location in magazine
MagNrRef, with reference to which the symmetrical search
is to be performed. This parameter is only relevant with a
"symmetrical" search direction
SearchDirection specifies the required search direction.
1: Forwards from the first location of the search domain
2: Backwards from the last location of the search
domain
3: symmetric to the real magazine location, which is
before the location specified with Magazine-
Number_ID and Location-Number_ID
KindofSearch
0: Find all tool with this property cutting edge
specifically
1: Search for the first tool found with this property
(cutting edge specifically)
2: Browse all cutting edges to find all tool with this
property
3: Browse all tools to search for the first tool found with
this property
Meaning
Create multitool
TOA
Multitool identifier
Reserved
Multitool number
1 to 32000: Multitool number specified by the user
-1: NCK allocates the multitool number itself
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions