Figure 13-7
PLC/NCK channel interface
PLC/axis, spindle, drive signals
The axis-specific and spindle-specific signals are divided into the following groups:
•
Shared axis/spindle signals
•
Axis signals
•
Spindle signals
•
Drive signals
The signals are transmitted cyclically at the start of OB 1 with the following exceptions:
Exceptions include:
•
Axial F value
•
M value
•
S value
An axial F value is entered via the M, S, F distributor of the basic program if it is transferred to the PLC during the
NC machining process.
The M and S value are also entered via the M, S, F distributor of the basic program if one or both values require
processing.
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
P3: Basic PLC Program for SINUMERIK 840D sl
13.7 Interface structure
867