Adjustment Of Adf Position - Toshiba e-STUDIO163 Service Handbook

3.9 Adjustment of the ADF (MR-2017)
3.9.1

Adjustment of ADF Position

Perform this adjustment when the ADF is not installed in the correct position.
Note: Note:
Check if the image adjustment for the equipment is performed properly before this adjustment of
the ADF.
[A] Checking
(1) Open the ADF and install 2 positioning pins
(the positioning pins are installed to the back
side of the hinge which is on the left side of
the ADF).
(2) Remove the platen sheet.
December 2005 © TOSHIBA TEC
Fig. 3-40
Fig. 3-41
3 - 41
e-STUDIO163/203 ADJUSTMENT
3