Toshiba e-STUDIO163 Service Handbook page 62

Classifi-
Code
cation
479 Laser Judged number of polygo-
nal motor rotation error
(At acceleration/decelera-
tion)
480 Paper Default setting of paper
feeding source
481 Paper Automatic change of paper
feeding source
482 Paper Feeding retry setting
feeding
483 Laser Pre-running rotation of
polygonal motor
e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
ALL
PPC
PPC
ALL
ALL
2 - 44
Default
<Accept-
RAM
able
value>
0 M 0: Waiting time for
<0-1> polygonal motor
rotation overshoot-
ing 0.6 sec.
1: Waiting time for
polygonal motor
rotation overshoot-
ing 2.2 sec.
0 M 0: A4/LT
<0-4> 1: Drawer
2: LCF
3: Not used
4: Not used
1 M Sets whether or not
<0-2> changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON (Changes to the
drawer with the
same paper direc-
tion and size: ex. A4
to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the dif-
ferent direction is
acceptable as long
as the size is the
same: ex., A4 to A4-
R, LT-R to LT. "1" is
applied when the
staple/hole-punch is
specified.)
0 M 0: ON
<0-1> 1: OFF
0 M Sets whether or not
<0-2> switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the ADF or
the platen cover is
opened.
0: Valid (when using
ADF and the origi-
nal is set manually)
1: Invalid
2: Valid (when using
ADF only)
Proce-
Contents
dure
1
1
1
1
1
December 2005 © TOSHIBA TEC