Options - Toshiba e-STUDIO163 Service Handbook

Capacity of originals in the automatic document feeder (Option)
.................................................. A3 to A5-R, LD to ST-R:
Toner supply ........................ Automatic toner density detection/supply
Density control........................ Automatic density mode and manual density mode selectable in 7
Weight.................................. Approximately TBD kg (TBD lb.) (include the developer material and
Power requirements ............... AC 110 V / 13.2 A, 115 V or 127 V / 12 A
* The acceptable value of each voltage is ±10%.
Power consumption ............. 1.5 kW or less (115 V series, 200 V series)
* The electric power is supplied to the ADF through the equipment.
Total counter........................... Electronical counter
Dimensions of the equipment .................. See the figure below (TBD)
e-STUDIO163/203 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
100 sheets / 80 g/m
Toner cartridge replacing method (There is a recovered toner supply
mechanism.)
steps
drum)
220-240 V or 240 V / 8 A (50/60 Hz)
T.B.D
Fig. 1-1
1 - 4
2
(Stack height 16 mm or less)
December 2005 © TOSHIBA TEC