Adjustment Of The Paper Feeding System - Toshiba e-STUDIO163 Service Handbook

3.7

Adjustment of the Paper Feeding System

3.7.1 Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side. Move the guide to the front side (Arrow
(A) direction in the lower figure).
Feeding direction
Fig. 3-30
Bypass feeding
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
(A)
Fig. 3-32
e-STUDIO163/203 ADJUSTMENT
[Rear]
Center
[Front]
(B)
The center of the printed image shifts to the rear
side. Move the guide to the rear side (Arrow
(B) direction in the lower figure).
Feeding direction
3 - 36
[Rear]
Center
[Front]
Fig. 3-31
December 2005 © TOSHIBA TEC