Self-Diagnosis Modes - Toshiba e-STUDIO163 Service Handbook

2.2

Self-diagnosis Modes

Mode For start
Input check [0]+[3]+
mode [POWER]
Output check [0]+[4]+
mode [POWER]
Test print [0]+[7]+
mode [POWER]
Adjustment [0]+[5]+
mode [POWER]
Setting mode [0]+[8]+
[POWER]
List print mode [9]+[START]
+[POWER]
Note: Note:
To enter the desired mode, turn ON the power while two digital keys designated to each mode
(e.g. [0] and [5]) are pressed simultaneously.
Normal
Input check
Warming up
mode
Ready
[POWER]
OFF
*1
To user
*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.
December 2005 © TOSHIBA TEC
Contents
Checks the status of input signals.
Checks the status of output signals.
Outputs the test patterns.
Adjusts various items.
Sets various items.
Prints out the data lists of the codes 05/08 and
pixel counter.
[POWER]
ON
[0][3] [0][4]
Output check Test print
mode
State transition diagram of self-diagnosis modes
Fig. 2-1
2 - 3
For exit
[POWER]
OFF/ON
[POWER]
OFF/ON
[POWER]
OFF/ON
[POWER]
OFF/ON
[POWER]
OFF/ON
[POWER]
OFF/ON
[0][7] [0][5]
Adjustment
mode
mode
e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
Display
[0][8] [9][START]
List print
Setting
mode
mode
2