Disassembly
36
Camera Remove and Replace
1.
Use the disassembly tool to remove the camera retaining ring from the camera
assembly on the transceiver PC board.
Figure 31. Removing the Camera Assembly Retaining Ring
2.
Use the camera disassembly tool to remove the camera assembly from the
imager socket on the transceiver PC board.
Figure 32. Removing the Camera Assembly
3.
To replace, align the key on the camera assembly to the key slot on the on the
imager socket. Do not remove the protective liner from the camera assembly.
February 19, 2008
Z6m/Z6tv CDMA
v463331
Camera
disassembly
tool
v513338
6809513A80-B