Disassembly
58
48. Once the initial bend has been established next directly press down on the tabs
with the black stick.
Figure 69. Bending the Slider Keypad Tabs
49. Replace the Main lens (see page 61).
Attach the Slider to the Front housing
1.
Before assembling slider please inspect the slider guide to insure that the slider
mechanism pivot arm is properly inserted into the magnesium housing.
2.
Keep the slider outer close to the magnesium inner part as shown.
3.
Maintain a 70 degree angle between the 2 components.
February 19, 2008
Z6m/Z6tv CDMA
v526846
6809513A80-B