Panasonic KX-NS1000 Pc Programming Manual page 729

Carrier Access Code
Specifies the carrier access code. The carrier access code can be added to the user-dialled number by
specifying "C" in
Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
TRG 01–TRG 96
Selects the trunk groups that connect to the carrier.
TRG 01–TRG 96
Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled for use
with that carrier.
Value Range
OFF (white), ON (blue)
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Authorisation Code for Tenant
Specifies an Authorisation code for each tenant. The Authorisation codes can be added to the user-dialled
number by specifying "A" command in
Authorisation Code for Tenant—Tenant 1–Tenant 32
Specifies the Authorisation code of each carrier for each tenant.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Modify Command on this screen.
Modify Command on the Carrier tab.
16.5 PBX Configuration—[8-5] ARS—Carrier
PC Programming Manual 729