Panasonic KX-NS1000 Pc Programming Manual page 703

Charge Options—Currency Display Position
Specifies whether the currency characters are displayed before or after the call charge.
Value Range
Head, Tail
Maintenance Console Location
14.2 PBX Configuration—[6-2] Feature—Hotel & Charge
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 3—
Limit
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 3—
Limit
14.3 PBX Configuration—[6-3] Feature—Verification Code—
Feature Guide References
2.22.3 Call Charge Services
Charge Options—Action at Charge Limit
Selects what happens when the amount of the call charge reaches the pre-programmed limit during a
conversation.
Value Range
Alarm: Only a warning tone is heard.
Alarm + Disconnect: A warning tone is heard, and then the call is disconnected.
Maintenance Console Location
14.2 PBX Configuration—[6-2] Feature—Hotel & Charge
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 3—
Limit
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 3—
Limit
Feature Guide References
2.7.2 Budget Management
Charge Options—Meter Start on Answer Detection
Enables the PBX to start counting the call charge when the answer signal from the telephone company is
detected.
14.2 PBX Configuration—[6-2] Feature—Hotel & Charge
Budget Management
Charge
Charge
Charge
Charge
PC Programming Manual 703