Panasonic KX-NS1000 Pc Programming Manual page 911

F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
A: Feature Access Code
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Outside Transfer Sequence—Call Transfer to Outside Answer Mode
Specifies the answering method the system uses to detect whether the destination party has answered the
transferred trunk call.
Value Range
Guidance: The system plays the following guidance before connecting the line to the destination party: "You
have a call. To answer the call, press [1]. Otherwise, press [2] and hang up." If the destination party presses
"1", he or she will be able to answer the transferred trunk call. The system continues playing this guidance for
the time specified in
Parameters/MSW Notification. If the transferred party does not answer the call within this time, the system
considers it as a No Answer call.
Analyze: The system monitors the status of the trunk, recognises that the destination party goes off-hook, and
connects the line.
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.2.1.7 Call Transfer to Outside
Trunk Group (1–96)—Trunk Group No.
Specifies a trunk group for making settings for EFA Transfer, Caller ID Callback, and Outside Line Access
Sequence for Caller ID Callback. Selecting different trunk groups from this drop-down list allows settings to be
made for each trunk group.
Value Range
1–96
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Trunk Group (1–96)—EFA Transfer
Specifies whether or not the system uses EFA (External Feature Access) when transferring incoming trunk
calls to another trunk. If set to "Enable", the system transfers incoming trunk calls to another trunk according
Dialling Parameters—Outgoing Call No Answer Time (10-90 s) in Dialling
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual 911