Panasonic KX-NS1000 Pc Programming Manual page 813

Auto Login Caller ID Password Entry Requirement
Specifies if a password is required for entry when automatic login is performed using the Caller ID of the number
set in Auto Login Caller ID 1 or Auto Login Caller ID 2.
Value Range
Yes, No
Notice
If this is set to "No", ensure that unauthorised third-parties are not allowed access to that extension using
the number assigned to Auto Login Caller ID 1 or Auto Login Caller ID 2.
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Guide References
3.2.2.3 Automatic Login
Auto Login DDI/DID
Specifies the DDI/DID number for Automatic Login. When the Unified Messaging system receives this DDI/
DID number from the PBX, the caller (subscriber) is automatically logged in to the mailbox. Note that this
number must be unique for each mailbox.
Value Range
Max. 20 digits
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Guide References
3.2.2.3 Automatic Login
Auto Login TRG No.
Specifies the trunk number for Automatic Login. When the Unified Messaging system receives a call on this
trunk, the caller (subscriber) is automatically logged in to the mailbox. Note that this number must be unique
for each mailbox.
Value Range
1–96
Feature Guide References
3.2.2.3 Automatic Login
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
PC Programming Manual 813