Panasonic KX-NS1000 Pc Programming Manual page 783

Maintenance Console Location
19.2 PBX Configuration—[11-2] Maintenance—Air Synchronisation
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
19.2 PBX Configuration—[11-2] Maintenance—Air Synchronisation
Status
Indicates whether a certain CS is registered (reference only).
Value Range
-, Registered
Maintenance Console Location
19.2 PBX Configuration—[11-2] Maintenance—Air Synchronisation
CS Class
Specifies the classification of each CS. This parameter can only be modified when Connection on this screen
is set to OUS.
Value Range
Sync Master CS1, Sync Master CS2, Sync Slave CS
Maintenance Console Location
19.2 PBX Configuration—[11-2] Maintenance—Air Synchronisation
Primary CS—Index
Specifies the number of the primary CS.
Value Range
1–16
Maintenance Console Location
19.2 PBX Configuration—[11-2] Maintenance—Air Synchronisation
19.2 PBX Configuration—[11-2] Maintenance—Air Synchronisation
PC Programming Manual 783