Clip-Copy Screen - Siemens SISTORE AX9 250 User Manual

Operation

9.10.6 Clip-Copy screen

104
Siemens Building Technologies
Fire Safety & Security Products
The Clip-Copy screen can be used to copy video clips to an internal CD-RW or
DVD-RW drive, or external USB hard disk, CD-RW or flash drive. The copied video
clips can be viewed on computers running Microsoft Windows 98, ME, 2000 or XP.
Refer to the Appendix, Section 12.1: Preparing the USB-IDE hard disk drive in
Windows 2000 for information on preparing the external drive for clip copy. The clip
copy can be simply done by pressing the MENU button or the FREEZE button.
Press and hold the MENU button for more than two seconds while in the Search
mode, and the Clip-Copy screen appears to allow clip copy setup.
Pressing the FREEZE button during the playback will set the starting point of the
video to be clip copied, and the
screen. Pressing the FREEZE button again will set the ending point of the video to
be clip copied by displaying the Clip-Copy screen.
Pressing and holding the FREEZE button for more than two seconds while in the
Search mode or Live Monitoring mode initiates the One-Touch Clip Copy function.
The last recorded image will be the ending point of video to be clip copied, and the
system will automatically begin to calculate the possible video data size that the
selected storage media can handle.
Fig. 118 Clip-Copy screen
The Data Source box displays the source from which you make a video clip copy.
The data source can be selected from Record or Archive in the Search menu.
You can search video from the first to last recorded images, or you can set the
start and stop times and dates.
1. Highlight the box beside From and press the
and Off.
When set to Off, you can enter a specific Date and Time.
When set to On, the search will be from the first recorded image.
2. Highlight the box beside To and press the
and Off.
When set to Off, you can enter a specific Date and Time.
When set to On, the search will be from the last recorded image.
3. Highlight the box beside Password and press the
A virtual keyboard appears allowing you to enter the password for reviewing
the video clips.
4. Highlight the box beside Channels and press the
You can select the cameras that you would like to include in your video clip.
icon displays at the bottom-left corner of the
button to toggle between On
button to toggle between On
button.
button.
03.2007