Siemens SISTORE AX9 250 User Manual page 78

Configuration
78
Siemens Building Technologies
Fire Safety & Security Products
Exporting settings
To export the current DVR settings, connect the USB device to the DVR.
1. Highlight Setup – Export... and press the
2. Highlight the box beside File name and press the
A virtual keyboard allows you to enter the file name.
Selecting Export will save the current settings in .dat file format on the USB
device.
Fig. 89 Setup Export screen
System Log
Highlight Show System Log... and press the
screen.
Fig. 90 System Log screen
The System Log screen lists system activities (up to 5,000 from the latest) that
have occurred along with the time and date. The
column for system activities of the remote site. You can scroll through the log
pages by using the Up and Down arrows, or you can go directly to a log page by
entering the log page number in the box at the bottom left of the screen. Highlight
Close and press the
The box beside Recorded Data – From / To displays the time information of
recorded data.
Highlighting Clear All Data... and pressing the
You will be asked to verify that you wish to clear all data before the DVR erases
the video data. Clear All Data... will not clear the System Log.
After you are finished with the Information Screen, you can highlight Save and
press the button to save the changes and exit the screen. If you do not wish to
save the changes, highlight Cancel and press the
button to exit the screen.
button.
button.
button to display the System Log
icon will display in the last
button will clear all video data.
button to exit the screen.
03.2007