Siemens SISTORE AX9 250 User Manual page 49

Siemens Building Technologies
Fire Safety & Security Products
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
6. Highlight OK and press the
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
Fig. 44 Alarm-In Action 2 screen
Actions 2
1. Highlight the desired box under the PTZ heading, and press the
A list of PTZ presets appear.
2. Select the preset position for each PTZ camera, where you want PTZ
cameras to move to whenever the DVR detects an input on the associated
alarm input.
3. Highlight the desired box under the Spot Monitor heading, and press the
button.
A list of SPOT monitors and cameras appears.
Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects an input on
the associated alarm input.
You can save your Alarm-In changes by highlighting Save and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
button.
button to accept your changes.
Configuration
button.
49
03.2007