Siemens SISTORE AX9 250 User Manual page 55

Siemens Building Technologies
Fire Safety & Security Products
Actions 1
The DVR can be set to react to video loss differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out connector,
sound the DVR's internal buzzer, notify a number of different devices, and/or move
PTZ cameras to preset positions.
1. Highlight the box under the Record heading and press the
A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the
DVR detects video loss on the selected camera, it starts recording video from
all the associated cameras.
NOTE
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
2. Highlight the box under the Alarm-Out heading and press the
A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with that camera as you wish. When
the DVR detects video loss on the selected camera, it will trigger output
signals on all the associated Alarm-Out connectors. You can also have the
DVR's internal buzzer sound if video is lost on the selected camera.
NOTE
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
3. Highlight the box under the Notify heading and press the
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
4. Highlight OK and press the
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
Fig. 55 Video Loss Actions 2 screen
button.
button to accept your changes.
Configuration
button.
button.
button.
55
03.2007