10
Troubleshooting
Siemens Building Technologies
Fire Safety & Security Products
Problem
No power
No live video
Live video very bright
DVR has stopped recording
The icon
displays, however,
the DVR is not recording
Possible solution
Check power cord connections.
Confirm that there is power at the outlet.
Check camera video cable and connections.
Check monitor video cable and connections.
Confirm that the camera has power.
Check camera lens settings.
If a cable is attached to the "Loop" connector, make certain it is
connected to a properly terminated device.
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
and
display when there is no event, and the DVR is not
recording. The red
and
the DVR starts recording.
Troubleshooting
display when any event occurs and
03.2007
107