Troubleshooting - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

Troubleshooting

9 Troubleshooting
102
Siemens AG
Problem
No power
No live video
No Live Video on the VGA
Monitor
DVR has stopped recording
The icon displays, however,
the DVR is not recording
Possible solution
z
Check power cord connections.
z
Confirm that there is power at the outlet.
z
Check camera video cable and connections.
z
Check monitor video cable and connections.
z
Confirm that the camera has power.
z
Check camera lens settings.
If the DVR does not detect a VGA monitor automatically, press
and hold the Panic button on the front panel or remote control for
5 seconds or longer to switch the video output from Video out to
VGA out.
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
and display when there is no event, and the DVR is not
recording. The red and
the DVR starts recording.
display when any event occurs and
06.2010