Network Screen - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

7.8.1

Network screen

Siemens AG
Highlight Network in the Network menu and press the
Î
The Network setup screen displays.
Î
You will be able to change the Network, Mail, Callback and Web Client settings.
Fig. 16 Network setup screen
Network
1. Highlight the first box beside Transfer Speed.
2. Press the Up and Down arrow buttons to set the Transfer Speed from 50 Kbps
to 100 Mbps.
3. Highlight the second box beside Transfer Speed.
Î
You can select the unit of measure for the transfer speed between: bps and ips.
4. Press the button to set the transfer speed.
5. Highlight the box beside Quality and press the
Î
You can select the quality from: Very High, High, Standard and Basic.
6. Press the button to set the Quality.
7. The DVR supports two-way audio communication between a local system and
a PC running RAS. Highlighting the box beside Remote Audio Channel and
pressing the button allows you to select a camera channel associated with the
audio channel that sends audio to the remote site. Selecting Select From RAS
will send audio of the channel selected from RAS.
NOTE
The higher Quality settings require higher Transfer Speed settings. The transfer speed you set is the
maximum speed. Depending on the network environment, this speed may not be achieved.
NOTE
The local recording speed might be affected by various network bandwidth (Transfer Speed)
conditions.
Configuration
button.
button.
06.2010
27