Table of Contents
Advertisement
Configuration
7.7
Recording settings
7.7.1
Record screen
20
Siemens AG
Your DVR offers a variety of flexible recording modes. You can set it up to record all
the time or to only record events. It can be set up to continue recording once the
hard disk drive is full by recording over the oldest video, or you can set it up to alert
you when the hard disk is full and stop recording.
Fig. 7
Record menu
Highlight Record in the Record menu and press the
Î
The Record setup screen appears.
Fig. 8
Record setup screen
Highlighting Recycle and pressing the
Recycle mode, the DVR records over the oldest video data once all available
storage space has been used. When Recycle is turned off, the DVR stops recording
once all available storage space has been used.
1.
Highlight the Resolution box and select from "Very High", "High" and
"Standard".
NOTE
The total ips of all camera channels will be limited to 50 ips (60 ips for NTSC) when set to High
resolution and 25 ips (30 ips for NTSC) when set to Very High resolution.
button.
button toggles between On and Off. In the
06.2010
Hide quick links:
Advertisement
Table of Contents
