Table of Contents
Advertisement
Configuration
44
Siemens AG
Fig. 38
Video Loss Actions screen
The DVR can be set to react to video loss differently for each camera. Each camera
can be associated with another camera, trigger an Alarm-Out connector, sound the
DVR's internal buzzer, notify a number of different devices, and/or move PTZ
cameras to preset positions.
1.
Highlight the box under the Record heading and press the
Î
A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the DVR
detects video loss on the selected camera, it starts recording video from all the
associated cameras.
NOTE
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
2.
Highlight the box under the Alarm-Out heading and press the
3.
Select between Alarm Output and Beep (DVR's internal buzzer) that you would
like to activate and to sound whenever the DVR detects video loss on the
selected camera.
NOTE
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
4.
Highlight the box under the Notify heading and press the
You can toggle the entire list On and Off by highlighting Notification and
pressing the
button. You can toggle the individual items On and Off by
highlighting that item and pressing the
5.
Highlight OK and press the
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
button.
button to accept your changes.
button.
button.
button.
06.2010
Hide quick links:
Advertisement
Table of Contents
