Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 49

Siemens AG
Refer to the device manufacturer's documentation for the text string that the
device sends when a transaction ends.
13. Highlight the more line(s) box, and press the
14. Select the number of additional lines of text that you want the DVR to record.
Î
You can choose from 0 to 10.
15. Highlight the box beside Line Delimiter, and press the
16. Use the virtual keyboard to enter the character(s) that the device uses to
indicate the end of a line.
Î Special characters can be created using ^ and a capital letter; e.g., ^J for NL
(New Line), ^M for CR (Carriage Return).
Refer to the device manufacturer's documentation for Line Delimiter
character(s).
17. Highlight the box beside Ignore String, and press the
18. Use the virtual keyboard to enter any strings of text that you want the DVR to
ignore.
Refer to the device manufacturer's documentation for text strings that the
device sends during transactions, so you will know which ones you do not want
recorded.
19. Highlight the Case Sensitive box, and press the
and Off.
Refer to the device manufacturer's documentation to determine if the text
strings are Case Sensitive.
Î
If the device distinguishes between upper and lower case letters, make certain
the Case Sensitive box is turned On.
20. Highlight the box beside Time Out, and press the
21. Set the length of time to wait for the new text string.
Î
The DVR will consider a transaction complete if no new text strings are entered
between the last text input and the dwell time out. You can adjust the Time Out
dwell from 5 seconds to 15 minutes.
22. Highlight the Actions tab.
Î The Text-In Actions screen displays.
Fig. 43 Text-In Actions screen
Configuration
button.
button.
button.
button to toggle between On
button.
49
06.2010