Table of Contents
Advertisement
Siemens AG
The box beside Temperature displays the temperature of the storage device:
Good
The temperature is normal.
Bad
The temperature is 70°C (158 °F) or higher.
N/A
The DVR cannot read the temperature.
The box beside S.M.A.R.T. displays "Good", "Bad" or "N/A", depending on storage
conditions:
Good
The storage condition is normal.
Bad
Data cannot be written on or read from the storage device.
N/A
Storage conditions are normal, however, the S.M.A.R.T. monitoring is not working or
supported.
NOTE
When the storage condition is "Bad", the Event Status – Storage screen displays and you can check
the storage condition for details. Once the "Bad" message displays, replacing the hard disk drive is
recommended, usually within 24 hours.
NOTE
Temperature and S.M.A.R.T. information will be available only for internal hard disk drives supporting
the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.
"Not Formatted" displays in the upper part of the Format... box if the hard disk drive
has not been formatted. Highlight the Format... box and press the
format the device for recording.
Î
Selecting Close and pressing the
button exits the screen.
Configuration
button to
67
06.2010
Hide quick links:
Advertisement
Table of Contents
