Siemens SISTORE AX9 250 User Manual page 42

Configuration
42
Siemens Building Technologies
Fire Safety & Security Products
NOTE
The e-mail address must include the "@" character to be a valid address.
12. Highlight the box beside Recipient and enter the recipient's e-mail address.
13. Use the virtual keyboard to enter the e-mail address.
14. Highlight the Callback tab.
The Callback screen displays.
The DVR can be set up to contact a computer running RAS (Remote
Administration System) when an event occurs.
Fig. 34 Callback setup screen
Callback
1. Highlight LAN and press the
When LAN is turned On you can change the IP addresses.
2. Highlight the IP Address box that you want to change and press the
button.
3. Enter the IP address of the computer you want contacted during an event.
You can enter up to five IP addresses.
4. Highlight the box beside Retry and enter the number of times you would like
the DVR to try contacting the computer.
You can select from 1 to 10 retries.
If the modem was enabled in the Network screen, you can set up the DVR to
contact a computer running RAS.
5. Highlight Modem and press the
When Modem is turned On you can enter a telephone number.
6. Highlight the box beside Remote Server Phone Number and enter the
telephone number of the computer running RAS.
7. Highlight the box beside Outside Line Call and enter any numbers that must
be dialled for an outside line for your telephone system; for example, "9".
8. Highlight the box beside Callback Phone Number and enter the telephone
number of the DVR.
You can save your notification changes by highlighting Save and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
button to toggle between On and Off.
button to toggle between On and Off.
03.2007