Task - Siemens SINAMICS S120 Installation And Start-Up Manual

3.6.1

Task

1. Commission a drive system with the following components:
Table 3-8
Designation
Closed-loop control and infeed
Control Unit
Active Line Module
Active Interface
Module
Drive 1
Motor Module
Motor
Drive 2
Motor Module
Motor
2. The enable signals for the infeed and drive are to be transmitted via terminals.
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
Initial commissioning using vector (chassis) as an example
Component overview
Component
Control Unit 320
Active Line Module
380 kW / 400 V
Active Interface Module
Motor Module 380 A
Induction motor
– without brake
– with encoder
Motor Module 380 A
Induction motor
– without brake
– with encoder
Commissioning
Order number
6SL3040-0MA00-0AAx
6SL3330-7TE36-1AAx
6SL3300-7TE38-4AAx
6SL3320-1TE33-8AAx
Type: 1LA8
Rated voltage = 400 V
Rated current = 345 A
Rated output = 200 kW
Rated power factor = 0.86
Rated frequency = 50.00 Hz
Rated speed = 989 1/min
Cooling method = self cooling
HTL encoder, 1024 p/r, A/B, R
6SL3320–1TE33–8AAx
Type: 1LA8
Rated voltage = 400 V
Rated current = 345 A
Rated output = 200 kW
Rated power factor = 0.86
Rated frequency = 50.00 Hz
Rated speed = 989 1/min
Cooling method = self cooling
HTL encoder, 1024 p/r, A/B, R
3-67