Error And Warning Details - Mitsubishi Electric QD77MS User Manual

6.1 Error and warning details

[1] Error
[2] Warning
Errors related to synchronous control are shown below. Refer to the "User's Manual
(Positioning Control)" of each Simple Motion module for other errors.
Errors can be confirmed with the LED display of Simple Motion module or GX Works2.
Refer to the "Simple Motion Module Setting Tool Help" of GX Works2 for details.
Error code
600 to 699 Synchronous control input axis errors
700 to 799 Synchronous control output axis errors
Warnings related to synchronous control are shown below. Refer to the "User's Manual
(Positioning Control)" of each Simple Motion module for other warnings.
The warning definitions can be found from the warning codes. Confirming them requires
GX Works2.
Refer to the "Simple Motion Module Setting Tool Help" of GX Works2 for details.
Warning code
600 to 699 Synchronous control input axis warnings
700 to 799 Synchronous control output axis warnings
800 to 899 Cam operation warnings
Chapter 6 Troubleshooting (Synchronous Control)
Classification of errors
Classification of warnings
6 - 2
Description
Section 6.2.1
Section 6.3.1
Description
Section 6.2.2
Section 6.3.2
Section 6.4