List Of Cam Auto-Generation Warnings - Mitsubishi Electric QD77MS User Manual

6.4.2 List of cam auto-generation warnings

Warning
Warning name
No.
Outside cam auto-
820
generation cam No.
(334h)
range
821 Outside cam auto-
(335h) generation type range
Cam auto-generation
822
cam storage area
(336h)
capacity over
Cam auto-generation
823
cam open area
(337h)
capacity over
824 Outside cam auto-
(338h) generation data range
825 Cam auto-generation
(339h) calculation disable
826 Cam auto-generation
(33Ah) data write inhibit
Warning
" [Cd.609] Cam auto-generation cam
No." is outside the range of 1 to 256.
" [Cd.610] Cam auto-generation type" is
other than 1.
• The free area in the cam storage area
is insufficient.
• The writable area is insufficient due to
the decoupling of free area.
• The free area in the cam open area is
insufficient.
• The writable area is insufficient due to
the decoupling of free area.
" [Cd.611] Cam auto-generation data" is
outside the setting range.
" [Cd.611] Cam auto-generation data" is
set to the value that the cam pattern
cannot be generated. (Such as when
the sheet synchronization width is larger
than the sheet length in the cam for a
rotary cutter)
Cam auto-generation is executed with
the cam data write password set.
Chapter 6 Troubleshooting (Synchronous Control)
Operation status at
warning occurrence
Cam auto-generation
is not executed.
6 - 13
Corrective action
Set a value within the range of 1 to 256.
Set 1.
• Decrease the number of cam data
(number of cams, cam resolution, and
coordinate number).
• Erase the cam data and rewrite it.
Set a value within the setting range for
the cam auto-generation.
Review the setting value of the cam
auto-generation data.
Delete the cam data write password
with a programming tool.