Required Adjustments After Part Replacement - Panasonic KV-S1025C SERIES Service Manual

8.5.

Required Adjustments After Part Replacement

The following adjustments are required when a circuit board assembly or part is replaced or reassembled.
Action Code: R: Replace
Circuit Board or Part
IC1013 (on CONTROL
Board)
CONTROL Board or
IC1011 (on CONTROL
Board)
STARTING SENSOR
Board
Optical Unit (F)
Optical Unit (B)
(KV-S1025C Series Only)
Lamp (F)
Lamp Drive Board (F)
Lamp (B)
(KV-S1025C Series Only)
Lamp Drive Board (B)
(KV-S1025C Series Only)
Reference Area (Front)
Reference Area (Back)
(KV-S1025C Series Only)
Conveyor Roller
Exit Roller
A: Reassemble
Action
Code
R 1. Adjust Shading.
R 1. Adjust Shading. (Only when replacing CONTROL
Board assembly)
2. Adjust All Position.
3. Adjust Individual Position, manually as required.
4. Set USB ID.
R, A 1. Adjust All Position, or the following adjustment should be
required.
a. Adjust Length in Individual Position.
b. Adjust Paper-end Position in Individual Position.
c. Adjust Front Vertical Position in Individual Position.
d. Adjust Back Vertical Position in Individual Position.
(KV-S1025C Series Only)
R, A 1. Adjust Shading.
2. Adjust All Position, or the following adjustment should be
required.
a. Adjust Front Vertical Position in Individual Position.
b. Adjust Front Horizontal Position in Individual Position.
c. Adjust Front Width in Individual Position.
R, A 1. Adjust Shading.
2. Adjust All Position, or the following adjustment should be
required.
a. Adjust Back Vertical Position in Individual Position.
b. Adjust Back Horizontal Position in Individual Position.
c. Adjust Back Width in Individual Position.
R, A 1. Adjust Shading.
2. Adjust All Position, or the following adjustment should be
required.
a. Adjust Front Vertical Position in Individual Position.
b. Adjust Front Horizontal Position in Individual Position.
c. Adjust Front Width in Individual Position.
R, A 1. Adjust Shading.
2. Adjust All Position, or the following adjustment should be
required.
a. Adjust Front Vertical Position in Individual Position.
b. Adjust Front Horizontal Position in Individual Position.
c. Adjust Front Width in Individual Position.
R, A 1. Adjust Shading.
2. Adjust All Position, or the following adjustment should be
required.
a. Adjust Back Vertical Position in Individual Position.
b. Adjust Back Horizontal Position in Individual Position.
c. Adjust Back Width in Individual Position.
R, A 1. Adjust Shading.
2. Adjust All Position, or the following adjustment should be
required.
a. Adjust Back Vertical Position in Individual Position.
b. Adjust Back Horizontal Position in Individual Position.
c. Adjust Back Width in Individual Position.
R 1. Adjust Shading.
R 1. Adjust Shading.
R 1. Adjust Length in Individual Position, or adjust All Position.
R 1. Adjust Length in Individual Position, or adjust All Position.
Required Adjustment
60
Remarks
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1