Synchronize Peer Group - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration
Field
AP Profiles
MAC Authentication
Database
Captive Portal
RADIUS Client
Unmanaged AP Re-
provisioning Mode
Path: Wireless > Peer Group > Peer Status
Synchronize the settings among the peer group.
1. Click Wireless > Peer Group > Peer Status. Peer Status List will appear.
2. Click Start Sync for All Peers to synchronize the settings to all controllers, or synchronize one of the
peer group by right-clicking Start Sync.
3. The fields available on the Peer Status page are give in the table on the next page.
D-Link DWC-1000 User Manual
Enable this field to include all the AP profiles in the configuration that the controller
pushes to its peers. The AP profile includes the general AP settings, such as the
hardware type, Radio settings, SSID Profiles, and QoS settings.
Enable this field to include the MAC Authentication Database in the configuration
that the controller pushes to its peers.
Enable this field to include the Captive Portal information in the configuration that
the controller pushes to its peers.
Enable this field to include the Client RADIUS information in the configuration that
the controller pushes to its peers.
Enable to allow access points to accept provisioning information when not managed
by a controller.

Synchronize Peer Group

Description
129