D-Link DWC-1000 User Manual page 53

Section 3 - Basic Configuration
4. Select an Interface for the guest captive portal.
a. Click Wireless > Access Point > SSID Profiles. The SSID Profile List page will appear.
b. Under the SSID column, right click the selected SSID that will use the Captive Portal function and
click Edit.
c. Select a Captive Portal Type from the drop-down menu.
d. Click Save.
Note: Apply AP Profile from Wireless > Access Point > AP Profiles if the SSID have been associated with
a used AP Profile to change the configuration.
5. Generate guest accounts.
a. Log in the Front Desk page by entering http://<ip_address>/frontdesk (e.g., http://192.168.10.1/
frontdesk). Enter the username and password of the user you created in a "Front Desk" group.
b. This will open a billing desk page as shown in the figure below. Modify the usage if you want. Click
Generate.
D-Link DWC-1000 User Manual 53