Management; Remote Management - D-Link DWC-1000 User Manual

Section 9 - Maintenance
Path: Maintenance > Management > Remote Management
Note: This feature is only available with the DCS-1000-VPN license activation.
The Remote Access page allows you to enable remote management from outside your local network to configure
your wireless controller. Select HTTP and/or HTTPS.
Note: When remote management is enabled, the controller is accessible to anyone who knows its IP address. It is
HIGHLY RECOMMENDED that you change the default administrator and guest passwords before continuing.
1. Go to Maintenance > Management > Remote Management.
2. Set HTTP and/or HTTPS to On. If you select HTTPS, you may enter a port (4443 is the default setting).
3. To understand each field, refer to the table given on the next page.
D-Link DWC-1000 User Manual

Management

Remote Management

345