Chapter 5. Ap Management; Valid Access Point Configuration - D-Link DWC-1000 User Manual

Wireless Controller

Chapter 5. AP Management

The AP Management contains links to the following pages that help you manage and
maintain the APs on your DWC-1000 wireless controller network:


Valid Access Point Configuration


RF Management

Access Point Software Download

Local OUI Database

AP Provisioning

Manual Management
5.1 Valid Access Point Configuration
Setup > AP Management > Valid AP
MAC Address This field shows the MAC address of the AP. To change this field,
you must delete the entire Valid AP configuration and then enter the correct MAC
address from the page that lists all Valid AP's
Location: To help you identify the AP, you can enter a location. This field accepts
up to 32 alphanumeric characters
AP Mode You can configure the AP to be in one of three modes:

Standalone: The AP acts as an individual access point in the network.

Managed: If an AP is in Managed Mode, the Administrator Web UI and
SNMP services on the AP are disabled.

Rogue: Select Rogue as the AP mode if you wish to be notified (through an
SNMP trap, if enabled) when this AP is detected in the network.
Profile: If you configure multiple AP Profiles, you can select the profile to assign to
this AP
152
User Manual