Figure 99: Pppoe Configuration For Standard Isps - D-Link DWC-1000 User Manual

Wireless Controller

Figure 99: PPPoE configuration for standard ISPs

Most PPPoE ISP's use a single control and data connection, and require username /
password credentials to login and authenticate the DWC-1000 with the ISP. The ISP
connection type for this case is "PPPoE (Username/Password)". The GUI will prompt
you for authentication, service, and connection settings in order to establish the
PPPoE link.
For some ISP's, most popular in Japan, the use of "Japanese Multiple PPPoE" is
required in order to establish concurrent primary and secondary PPPoE connections
between the DWC-1000 and the ISP. The Primary connection is used for the bulk of
data and internet traffic and the Secondary PPPoE connection carries ISP specific (i.e.
control) traffic between the DWC-1000 and the ISP.
177
User Manual