Wireless Controller
configured in the AP profile (including automatic channel selection) and take effect
immediately. The manual channel and power assignments are not retained when the
AP is reset or if the profile is reapplied to the AP, such as when the AP disassociates
and re-associates with the controller.
Figure 96: Manual Management
MAC Address: Shows the MAC address of the AP.
Location: Shows the AP location, which is based on the value configured in the
RADIUS or local Valid AP database.
Debug: To help you troubleshoot, you can enable Telnet access to the AP so that
you can debug the device from the CLI. The Debug field shows the debug status
and can be one of the following:
To change the status, select the AP and click the Managed AP Debug button.
•
Disabled
•
Set Requested
•
Set in Progress
•
Enabled
170
User Manual