D-Link DWC-1000 User Manual page 66

Wireless Controller
Require Authentication Passphrase: Select this option to require APs to be
authenticated before they can associate with the controller. If you select this option,
you must configure the passphrase on the AP while it is in standalone mode as well
as in the Valid AP database.
RADIUS Authentication Server Name : Enter the name of the RADIUS server used
for AP and client authentications. The name can contain up to 32 alphanumeric
characters. Spaces, underscores, and dashes are also permitted. The controller acts as
the RADIUS client and performs all RADIUS transactions on behalf of the APs and
wireless clients.
RADIUS Authentication Server Configured: Indicates whether the RADIUS
authentication server is configured.
RADIUS Accounting Server Name: Enter the name of the RADIUS server used for
reporting wireless client associations and disassociations. The name can contain up to
32 alphanumeric characters. Spaces, underscores, and dashes are also permitted.
RADIUS Accounting Server Configured: Indicates whether the RADIUS accounting
server is configured.
RADIUS Accounting: Select to enable RADIUS accounting for wireless clients.
Country Code: Select the country code that represents the country where your
controller and APs operate. When you click Submit, a pop-up message asks you to
confirm the change. Wireless regulations vary from country to country. Make sure
you select the correct country code so that your WLAN system complies with the
regulations in your country.
•
Local: If you select this option, you must add the MAC address of
each AP to the local Valid AP database.
•
RADIUS: If you select this option, you must configure the MAC
address of each AP in an external RADIUS server.
65
User Manual