D-Link DWC-1000 User Manual page 305

Wireless Controller
User Manual
Known Client Database Lookup Method: When the controller detects a client on
the network it performs a lookup in the Known Client database. Specify whether the
controller should use the local or RADIUS database for these lookups.
Known Client Database RADIUS Server Name: If the known client database
lookup method is RADIUS then this field specifies the RADIUS server name.
Rogue Detected Trap Interval: Specify the interval, in seconds, between
transmissions of the SNMP trap telling the administrator that rogue APs are present
in the RF Scan database. If you set the value to 0, the trap is never sent.
De-Authentication Requests Threshold Interval : Specify the number of seconds
an AP should spend counting the DE authentication messages sent by wireless clients.
De-Authentication Requests Threshold Value: If controller receives more than
specified messages during the threshold interval the test triggers.
Authentication Requests Threshold Interval : Specify the number of seconds an AP
should spend counting the authentication messages sent by wireless clients.
Authentication Requests Threshold Value : If controller receives more than
specified messages during the threshold interval the test triggers. Probe Requests
Threshold Interval Specify the number of seconds an AP shou ld spend counting the
probe messages sent by wireless clients.
Probe Requests Threshold Value: Specify the number of probe requests a wireless
client is allowed to send during the threshold interval before the event is reported as
a threat.
Authentication Failure Threshold Value: Specify the number of 802.1X
authentication failures a client is allowed to have before the event is reported as a
threat.
304