Figure 135: Switch Settings - D-Link DWC-1000 User Manual

Wireless Controller

Figure 135: Switch settings

Power Saving State: When enabled, the total power to the LAN controller is dependent
on the number of connected ports. The overall current draw when a single port is
connected is less than when all of the available LAN ports have an active Ethernet
connection.
Length Detection State: When enabled the LAN controller will reduce the overall
current supplied to the LAN port when a small cable length is connected to that port.
Longer cables have higher resistance than shorter cables and require more power to
transmit packets over that distance. This option will reduce the power to a LAN port if
an Ethernet cable of less than 10 ft. is detected as being connected to that port.
Jumbo Frames Option: When enabled, LAN side devices can exchange traffic
containing jumbo frames.
235
User Manual