Ap Rf Scan Status - D-Link DWC-1000 User Manual

Wireless Controller
MAC Address: The Ethernet address of the AP. If the MAC address of the
AP is followed by an asterisk (*), it was reported by a peer controller.
IP Address: The IP address of the AP.
Last Failure Type: Indicates the last type of failure that occurred, which can
be one of the following:









Age: Time since failure occurred.

4.6.5 AP RF Scan Status

Status > Access Point Info> AP RF Scan Status
The radios on each AP can periodically scan the radio frequency to collect
information about other APs and wireless clients that are within range. In
normal operating mode the AP always scans on the operational channel for the
radio.
MAC Address: The Ethernet MAC address of the detected AP. This could be a
physical radio interface or VAP MAC.
Local Authentication
No Database Entry
Not Managed
RADIUS Authentication
RADIUS Challenged
RADIUS Unreachable
Invalid RADIUS Response
Invalid Profile ID
Profile Mismatch-Hardware Type
125
User Manual