Pop3 Settings - D-Link DWC-1000 User Manual

Wireless Controller
Second Active Directory Domain (optional): Active Directory Domain for
Authentication Server2 (if in use)
Third Active Directory Domain (optional):
Authentication Server3 (if in use)
Timeout: Set the amount of time in seconds, the appliance should wait for a response
from the authentication server.
Retries: The number of attempts the appliance will make to the authentication server
before giving and considering the authentication attempt as failed.
After configuring all fields in Active Directory settings, to check the server
reachability the administrator can use Server Checking option. When the administrator
clicks on server checking button the server reachability status for the configured
servers is returned.

11.7.5 POP3 Settings

Setup>External Authentications>POP3 Settings
POP3 (Post Office Protocol) is commonly used by email clients to retrieve email. It
supports both SSL as well as plain accounts. Enabling SSL support will have the client
send a SSL socket to the POP server. The POP client on the appliance uses
authentication 110 port for plain type and 995 for SSL type. Each step will return at
greeting messages: if success it will receive +OK else -ERROR.
If SSL support is enabled, a certificate authority must be selected to use for the SSL
authentication.
Active Directory Domain for
318
User Manual