Configuring Time Zone And Ntp - D-Link DWC-1000 User Manual

Wireless Controller
5- RF Scan AP List.
6- Client Association Database.
7- Ad Hoc Clients List.
8- Detected Clients List.

12.5 Configuring Time Zone and NTP

Tools > Date and Time
You can configure your time zone, whether or not to adjust for Daylight Savings Time,
and with which Network Time Protocol (NTP) server to synchronize the date and time.
You can choose to set Date and Time manually, which will store the information on the
controller real time clock (RTC). If the controller has access to the internet, the most
accurate mechanism to set the controller time is to enable NTP server communication.

Accurate date and time on the controller is critical for firewall schedules,
Wi-Fi power saving support to disable APs at certain times of the day, and
accurate logging.
Please follow the steps below to configure the NTP server:
1.
Select the controller time zone, relative to Greenwich Mean Time (GMT).
2.
If supported for your region, click to Enable Daylight Savings.
3.
Determine whether to use default or custom Network Time Protocol (NTP) servers. If
custom, enter the server addresses or FQDN.
327
User Manual