Remark Cos To Dscp; Vlan Configuration; Figure 19: Remark Cos To Dscp - D-Link DWC-1000 User Manual

Wireless Controller

2.2.8 Remark CoS to DSCP

Setup > QoS > Remark CoS to DSCP
Remarking CoS to DSCP is an advanced QoS configuration, where the Layer 2 quality
of service field is translated to a Layer 3 QoS field in the packet, so that upstream
routers can make a QoS decision based on the DSCP field set in the packet.

Figure 19: Remark CoS to DSCP

Once you enable CoS to DSCP marking by choosing the check box, you can choose the
appropriate value of the DSCP for a given CoS value.
2.3

VLAN Configuration

The controller supports virtual network isolation on the LAN with the use of VLANs.
LAN devices can be configured to communicate in a subnet defined by VLAN
38
User Manual