Table of Contents
Advertisement
4.4.1.2 POP3 Server
The system may authenticate users using their POP3 email account. You may configure both primary and
secondary POP3 server for fault tolerance. POP3 refers to Post Office Protocol 3, a standard protocol used to
retrieve email stored in a mail server. The system may authenticate users by using POP mail accounts. Two POP3
servers are supported by the system, primary and secondary. When POP3 Server is enabled, at least one POP3
server is needed. Choose "POP3" in the Server Name field, the hyperlink beside the pull-down menu will become
"POP3 Setting".
Click the hyperlink POP3 Setting for further configuration. Enter the related information for the primary server
and/or the secondary server (the secondary server is not required). The blanks with red star are necessary
information. These settings will become effective immediately after clicking the Apply button.
Server IP: Enter the IP address/domain name given by the ISP.
Port: Enter the Port given by the ISP. The default value is 110.
SSL Setting: If this option is enabled, the POP3 protocol will perform the authentication.
DSA-6100 User Guide
86
Advertisement
Table of Contents
